AnyCubic introduced two new SLA printer models with monochrome screens just a few days ago: the Photon Mono 4K and the Photon Mono X 6K. Both represent specification upgrades for their respective lines, mainly focused on achieving higher-resolution 3D prints in the shortest possible time.
We were lucky enough to test the Photon Mono X 6K, successor to the Photon Mono X that we already reviewed here, and it undoubtedly proposes a new landscape for users of resin 3D printers, especially those who are about to enter this world.
Design and Features of the Photon Mono X 6K

Betting on the same formula that worked with its predecessor, the Photon Mono X 6K looks similar on the outside, with its large yellow anti-UV cover, black base, and 3.5-inch TFT touchscreen in the center, which gives access to the printer’s functions and settings. When opening it, we see its prominent dual linear rail, something we greatly appreciate for the stability and precision it provides during prints.

Moving on to the build plate, we see the first improvement that I am sure many will appreciate. Made of aluminum, the new plate has a surface with a laser-engraved pattern whose purpose is none other than improving print adhesion. And it has certainly worked: in the tests I have run, I had to reduce the exposure of the first layers because prints adhere quite well.
The Photon Mono X 6K has a 5.9-liter print volume with a screen area of 248.75 cm², meaning we can easily print models measuring 9.6 x 7.8 x 4.8 inches (24.5 x 19.7 x 12.2 cm).
That said, print volume is not the best part. This new printer integrates a 9.25-inch 6K screen (5,760 x 3,600 pixels) that ensures models with resolution of up to 34 microns. The 350:1 black-and-white contrast screen allows for better edges and corners, ensuring that even miniatures have quality and resolution above the competition.
Experience and Performance of the Photon Mono X 6K
If there is one thing to appreciate about AnyCubic, it is how practical it is to print as soon as you take the printer out of the box. There is nothing to configure except, of course, leveling the print plate, placing the included screen protector, which we greatly appreciate, and adding the resin.
Like the Photon Mono X, the Mono X 6K has the same user interface, and we have no complaints because it is very easy to use and can be put to work with just a couple of taps. That said, a refresh of the interface would not have hurt.

Print speed is a key point when deciding on the Photon Mono X 6K. With the right settings, it is possible to significantly reduce print time. It still does not compare with DLP 3D printers, such as AnyCubic’s Ultra, but it is clearly superior to the Photon Mono X, which already had good print times.

AnyCubic claims that the Photon Mono X 6K can print up to 8 cm per hour, which is possible with a curing time of 1 second per layer. Of course, to achieve this we also have to raise UV power up to 94%, set models with enough supports, and test the various settings allowed by Photon Workshop.

The results are more than satisfactory, as you can see in the model above, but it is clear that increasing speed will not work for every print we run. In this case, we recommend doing it with single-model prints rather than print batches.

As we said, the Photon Mono X 6K’s screen is configured to squeeze every pixel and obtain more polished edges and corners. We were able to see this in the 32 mm figures we printed using the default settings. The resulting figures preserved the details of the original models quite precisely.
Photon Workshop and a New Printing Format

At the time of writing this article, it is necessary to use AnyCubic’s proprietary slicer software, Photon Workshop version 2.1.29, which comes included on the USB drive. In addition, AnyCubic has changed the accepted file format for this new printer, apparently in favor of smaller files. While it is not possible to export directly to this new format from LycheeSlicer or Chitubox, support is expected to arrive in an update for both programs.
Photon Workshop has received a slight facelift and overhaul. The software responds much better than previous versions, and the menus have been reorganized to make the settings that are truly necessary for each print easier to understand. The software is still very basic, that is true, but for prints with little complexity, it is enough.
Conclusions

The Photon Mono X 6K delivers on what AnyCubic promised, that is clear. It is an SLA 3D printer with considerable print volume and the ability to finish jobs in less time than other models, without sacrificing quality. AnyCubic clearly bet on a formula that had already worked with its previous model and improved it.
| PROS | CONS |
|---|---|
| Higher print speed | New printing format currently compatible only with Photon Workshop |
| High-quality prints | The Wi-Fi function is still not very useful |
| Screen protector included | The printer interface did not receive any update |
| The print plate is a real success in terms of adhesion | |
| Easy setup and use |
For new users of resin 3D printers, this can be considered the most appropriate alternative because the price is justified and the features it offers are very complete. However, if you are already a Photon Mono X user, the upgrade may not be absolutely necessary considering that the performance differences are subtle.
The Photon Mono X 6K is available from AnyCubic’s official store with a limited $599 offer (limited units). After that, the printer will have a list price of $659.
Discover more from TekCrispy
Subscribe to get the latest posts sent to your email.



TekCrispy